Hydor Koralia Evolution Pumps guarantee a continuous and powerful water flow, which can be directed freely thanks to the special sphere-shaped connection to the combination suction -up-and-magnet support.

High performance , low energy consumption and quick and easy maintenance.

Just magnetically attach the pump anywhere on the glass sides of the tank. It will stay securely due to the unique, patented magnetic-support, which allows free and secure positioning anywhere in aquariums with glass up to 15mm (0,6 in) thick.

Wonderful for reef tanks. Great to prevent "dead zones" in any tank. The special sphere-shaped connection makes flow directing quick, simple and fully adjustable.

Hydor Korali Water Pump Features:
• New and improved vibration absorbing magnet.
• 50% less power consumption.
• 20% more water flow
• Sphere joint: adjustable flow direction
• Smaller design that older style Koralia pumps
• New shaft-less impeller technology

Three Models for Different Tanks
Koralia 750: 750 gph 4 watts FW 50-90gal SW 30-50gal	Koralia 1050: 1050 gph 8 watts FW 70-125gal SW 45-70gal	Koralia 1400: 1400 gph 6 watts FW 90-160gal SW 55-90gal

Use for re-circulating water inside aquarium refugium, sump. Drive protein skimmers and wet/dry filtration units.

Marineland Maxi Jet Euro Premium Utility Pump Features:
• Compact design optimized for maximum output with low power usage.
• Quiet operation with little or no heat. Motors self-protected against overheating by internal thermal safety switch.
• Able to run internal/submersible and external in-line**. (NJ400 is submersible only)
• UL-listed. Truly stated flow rates.
• All necessary attachment hardware supplied standard.
• Standardized NPT fittings**. Screened intake.

Four Models for Different Size Tanks
Model NJ900: Flow Rate: 247 GPH Max Head: 4.1 ft. Watts: 10 Inlet: 5/8" Outlet: 1/2", 3/4"	Model NJ1100: Flow Rate: 294 GPH Max Head: 5.7 ft. Watts: 21 Inlet: 5/8" Outlet: 1/2", 3/4"	Model NJ1800: Flow Rate: 475 GPH Max Head: 7 ft. Watts: 38 Inlet: 3/4" Outlet: 3/4", 1"
Model NJ3000: Flow Rate: 775 GPH Max Head: 9.1 ft. Watts: 58 Inlet: 3/4" Outlet: 3/4", 1"	Model NJ4500: Flow Rate: 1240 GPH Max Head: ft. Watts: Inlet: Outlet:	Model NJ5500: Flow Rate: 1384 GPH Max Head: ft. Watts: Inlet: Outlet:

The unique cord arrangement and Suction cup support permits vertical installation in small compartments making it ideal for small fountains or waterfalls, or terrariums as well as small aquariums.

Mini-Jet's® features make it the perfect pump for use in reef aquariums to create water currents

Mini-Jet Adjustable Flow Aquarium Pump Features:
• Vertical Installation for small spaces
• Adjustable Flow
• Motor will not overheat
• UL listed
• 1-1/2" x 2-3/8" x 2-1/4" H

Two Models for Different Tanks
404 Pump: 20-106 gph Outlet: ½"	606 Pump: 84-160 gph Outlet: ½"

Eheim Universal Water Pump Features:
• Centrifugal pump suitable for permanent use, both above and below water. Suitable for use in or out of fresh or salt water.
• Superior construction: ceramic shaft, ceramic and carbon bearing for long life and durability
• Integrated pre-filter allows efficient submerged use, while an interchangeable pressure connection is provided for tubing if the pump is installed externally.
• Silent operation
• Low energy consumption
• Not self-priming.
• Suction intake nozzle for hose connections. Can be unscrewed and sealed if suction is effected via pre-filter.
• Variable attachment base for optimum assembly.

Coralife Turbo-Sea External Pumps Features:
• Totally enclosed motor
• Powerful cooling fan to keep water temperature more stable
• Circulating model for general water circulation
• High Pressure models for use where high head pressure is needed such as canister filters, ponds etc.
• 3.5' cord
• UL listed
• Marine and Freshwater Environments
• Two Year Manufacturer's Limited Warranty

Five Models for Different Tank Sizes
Turbo-Sea 1090: 1090 gph Circulation Max Head: 13.1' 80 Watts Connections: 1" inlet/ 1" outlet 11-5/8" X 5-1/4" X 7"	Turbo-Sea 1270: 1270 gph Circulation Max Head: 13.1' 165 Watts Connections: 1" inlet/ 1" outlet 11-5/8" X 5-1/4" X 7"	Turbo-Sea 580: High Pressure 580 gph Max Head: 16.4' 90 Watts Connections: 3/4" inlet/ 3/4" outlet 11-5/8" X 5-1/4" X 7"	Turbo-Sea 790: High Pressure 793 gph Max Head: 20.7' 120 Watts Connections: 3/4" inlet/ 3/4" outlet 11-5/8" X 5-1/4" X 7"	Turbo-Sea 1100: High Pressure 1100 gph Max Head: 26.9' 170 Watts Connections: 1" inlet/ 1" outlet 15-1/4" X 9" X 8"

Most popular submersible water pump.

Only one moving part means that there aren't any seals to wear out. Approved for indoor and outdoor use. The Mag-Drive utility pump is a magnetically-driven, submersible pump. This unique energy-efficient design uses only one moving part - a ceramic/magnetic impeller. Originally conceived as a submersible, circulating pump for fresh and saltwater aquariums and ponds, the Mag-Drive's inherent characteristics make it ideal for pool maintenance applications as well.

Includes pre-filter sponge in intake.

Standard 10 Ft power cord. For 18 Ft. cord (for pond use), see:PondMaster Pumps cord.

These efficient pumps can also be used for:
• Fountains & Ponds
• Fish Tanks
• Waterfalls
• Flooded Rooms
• Statuary
• Sump Pump

Mag Drive Pump Specifications:
• Model 1.9 has a 190 GPH capacity. Pump is approximately 3.5" x 3" x 2.25" and uses 19 watts of power.
• Model 2 has a 250 gph capacity which drops to 125 at app 4 ft of head. Pump is approximately 4" x 3.5" x 4.5" and uses 24 watts of power.
• Model 3 has a 350 gph capacity which drops to 275 at app 4 ft of head. Pump is approximately " x " x " and uses watts of power.
• Model 5 has a 500 gph capacity which drops to 300 gallons at approximately 4 ft of head. Pump is approximately 5" x 4.8" x 4.2", uses 45 watts of power, and has a 10 ft cord..
• Model 7 has a 700 gph capacity which drops to 480 gallons at approximately 4 ft of head. Pump is approximately 5" x 4.8" x 4.2", uses 70 watts of power, and has a 10 ft cord.
• Model 9.5 has a capacity of 950 GPH which drops to 800 gallons at approximately 4 ft of head. Pump is approximately 6" x 5.5" x 3", uses 93 watts of power, and has a 10 ft cord. .
• Model 12 has a capacity of 1200 GPH which drops to 1100 gallons at approximately 4 ft of head. Pump is approximately 6.75" x 5.5" x 3", uses 110 watts of power, and has a 10 ft cord.
• Model 18 has a capacity of 1800 GPH which drops to 1400 gallons at approximately 4 ft of head. Pump is approximately 6.5" x 5.5" x 3", uses 120 watts of power, and has a 10 ft cord.
• Model 24 has a capacity of 2400 GPH which drops to 1900 gallons at approximately 4 ft of head. Pump is approximately 7.5" x 5.25" x 4", uses 254 watts of power, and has a 10 ft cord.

For 18 Ft cord, see:PondMaster Pumps

Magi-Klean uses 3 Simple Steps to clean equipment:
1. Simply add a packet of Magi-Klean to a container of water and place your dirty, calcium encrusted equipment into the solution. (Magi-Klean is not to be used inside the aquarium.)
2. Allow the equipment to soak for up to 24 hours. You can enlist the aid of a firm bristle brush to remove the most stubborn build-up.
3. Rinse the cleaned equipment thoroughly before reinstalling it into your aquarium.

Typically, aquarists have had to turn to relatively weak acids such as vinegar and citric acid to clean equipment. Such solutions require long soaks and intense scrubbing with less than desirable results. The obvious solution is to use a stronger acid like Muriatic. The problem though is that really strong acids are dangerous and difficult to use safely.

Magi-Klean takes advantage of the fact that calcium and other build-up commonly found on aquarium equipment can be broken down by acidic solutions.It is stronger than the traditional choices, allowing you to clean equipment more easily and in less time yet, it is safe for use by the home aquarist. The phosphonic acid used in Magi-Klean is the perfect solution.

Water enters the filter and is forced over the top of the intake column. There it drips through the mechanical and chemical filter trays, onto the BIO-Wheel where biological filtration (removal of toxic ammonia and nitrite) is efficiently carried out by a commercial-sized BIO-Wheel. Flow continues into sump area then is passed through the dedicated skimmer/refugium area.

Ample sump design features skimmer/refugium area for further customization.

Revolutionary front-loading media trays make keeping your filter in tip top shape a breeze. They also allow customization and expansion of mechanical and chemical filtration process.

Purchase a siphon overflow box for un-drilled aquariums.

Marineland in-Tank Sump filtration system Features:
• New design fits easily in stand. The ultimate solution for big tank filtration.
• Front loading easy-access media trays, plus patented high-capacity BIO-Wheel® (included; removable).
• 100% acrylic. Flame-polished edges; unsurpassed quality throughout.
• Dedicated chamber for Marine Series Protein Skimmer (not included) maintains constant water depth.
• High volume of flow through sump helps minimize debris buildup on bottom.See recommended pump (not inlcuded)

The custom air valve regulates air flow, the air filter eliminates noise and dust, and the intake strainer keeps debris from fouling the impeller...that's efficiency.

New longer 10 ft power cord makes placement easy.

Penguin Power Heads Features:
• Heavy duty construction
• Safe for both salt and freshwater aquariums
• Adjustable aeration valve and directional flow
• Debris strainer traps particulates to keep from fouling the impeller. (Model MD86608 has open-cell pre-filter sponge)
• Constructed with a single moving part. No maintenance or oil.
• Mounts anywhere with suction cup or bracket
• 10 ft power cord
• Approximately 4 in high

Three Sizes: 145 gph, 170 gph, and 300 gph

MD86608 (170 gph) has reverse flow capabilities to send oxygenated water deep into the gravel bed. Has reusable, slide-off sponge pre-filter. When used in the normal fashion with an undergravel filter, the sponge expands the bacteria bed and provides an additional biological filter.

The most efficient way to move the water is by using a pump and/or powerhead.

Rio Plus Aquarium Water Pumps/Powerheads are high performance, yet priced for the hobbyist. Desinged with next generation magnetic-rotor technology, the Rio® Plus Aqua Pumps and Powerheads offer the best high-performance solution in the aquarium industry. The ceramic shaft and durable high-impact plastic make the pump reliable and long lasting. Magnetic rotor technology offers low maintenance and high reliability. And, although the Rio Plus delivers a high flow rate with tremendous pressure capability, it is quiet to operate.

The largest and most powerful models provide excellent performance within wet or dry filters and in venturi protein skimmers when high pressure and flow rates are needed. Reliable and quiet, Rio® Plus Aqua Pumps and Powerheads do not use oil to operate so they cannot contaminate the aquatic environment

Other features of the Rio® Plus Aqua Pump and optional Powerhead include energy efficiency, low-heat operation and a flow rate intended to keep electric bills low.

The fully submersible Rio® can be used in both freshwater and saltwater.

Rio Plus Aqua Pump and Powerhead Features:
• Energy Efficient Design
• Fully Submersible
• Quiet Operation
• Low Heat Emission
• Ceramic Shaft & Bearings
• High Flow Rate
• Magnetic Rotor Technology
• Low Energy Consumption
• Durable High-Impact Plastic
• Fully Submersible
• Marine and Freshwater Environments

Four Models for Different Tank Sizes
Rio Plus 200: 138 gph 2.5" x 1.7" x 2.3"	Rio Plus 600: 200 gph 2.5" x 1.7" x 2.3"	Rio Plus 800: 211 gph 2.5" x 1.7" x 2.3"	Rio Plus 1100: 382 gph 4.86" x 2.5" x 3.25"	Rio Plus 1400: 420 gph 4.86" x 2.5" x 3.25"
Rio Plus 1700: 642 gph 5.75" x 2.63" x 4.2"	Rio Plus 2100: 692 gph 5.75" x 2.63" x 4.2"	Rio Plus 2500: 872 gph 5.75" x 2.63" x 4.2"	Rio Plus 3100: 900 gph 6.4" x 4.3" x 3.15"

Zoo Med Micropump 104 Features:
• Designed for fresh or saltwater applications with an adjustable flow rate.
• Requires only 2" water for submersion.
• Pumps 30-60 GPH with adjustable flow rate.
• New Feature - Pump can run dry for 30+ days without damage to the impeller!
• Accepts 1/2" ID tubing
• For fresh or saltwater applications.

Lifegard Sea Flow High Performance Pond Pump Features:
• High temperature engineered thermoplastic construction.
• See-through lid with cam and ramp quarter twist lock.
• Single piece corrosion resistant strainer pot and volute..
• Oversized strainer basket
• Funnel Flo diffuser for quiet operation.
• High efficiency impeller and life extending diffuser wear ring.
• 2" suction and discharge ports.
• 3 year limited warranty

LifeGard Tarpon pond filter is designed for heavy fish loads and high flow rates. For ponds 3000-7000 gallons. ...

The Tarpon is optimum in mechanical and biological filtration contained in one piece fiberglass reinforced tank for unmatched strength and durability. Includes Bio-Mate Solid Media Balls that trap debris and provide exceptional growth of beneficial bacteria to biologically clean your pond. (Cultivates nitrifying bacteria, promotes gas exchange, increases dissolved oxygen level and removes harmful gases)

Six position Hi-Flow Valve provides easy control of all filter functions: FILTER, WASTE, BACKWASH, CLOSED, RINSE and RECIRCULATE.

For a complete system add the Base and hose kit with a pump and you are ready to go.

Can be used above or in-ground. However in-ground use requires access to the controls on top AND drain plug on the bottom for winter draining.

Tarpon Pond Filter Features:
• Includes special High Flow Lateral System for pond applications.
• Will not clog when used with Bio-Mate media. (Included)
• Six position Hi-Flow Valve provides easy control of all filter functions.
• Includes a pressure gauge, manual air relief valve and sight glass for easy maintenance
• Bio-Mate media balls provide maximum surface area with the greatest possible mix of air and water.
• High surface area will not clog with organic matter.
• 10 year tank warranty